[Date Prev] [Date Index] [Date Next] [Thread Prev] [Thread Index] [Thread Next]

Re: Conserver and ssh

Brandon Stout bstout@squareup.com
Mon, 21 Apr 2014 18:38:38 GMT


Also, how does the conserver.passwd work? When does it use that rather than the authentication on the Opengear itself? To test, I have the same user on the Opengear as well as in the conserver.passwd with different passwords to see where it gets its passwords from. So far it just looks like it is using the password from the Opengear. I configured conserver with all the defaults so I am assuming conserver.passwd just needs to exist within the same directory as conserver.cf. Did I configure something incorrectly or does there need to be a line in the conserver.cf file to point to where conserver.passwd exists?


On Mon, Apr 21, 2014 at 11:32 AM, Brandon Stout <bstout@squareup.com> wrote:
So I actually figured out the problem so now it connects, I get the password prompt and when I enter it correctly it works. The problem is that when I disconnect and reconnect, it no longer asks me for a password and just puts me through to the console. is there some sort of disconnect I need to do manually to get it to reset and ask for a password? Seems like it just stays connected once the pw is entered, regardless of someone exiting.


On Mon, Apr 21, 2014 at 11:26 AM, Brandon Stout <bstout@squareup.com> wrote:
thanks Nathan, I actually was trying that right after I sent this email and added this

default opengear-ssh { type exec; portbase 2000; portinc 1;
                   exec /usr/bin/ssh -p P -l tsuser H;
                   execsubst H=hs,P=Pd; }

still not working though with just about nothing useful in the logs. Doesn't hang but it still doesn't work. Just empty space and no output. 


On Mon, Apr 21, 2014 at 10:39 AM, Nathan Straz <nstraz@redhat.com> wrote:
On Apr 21 10:29, Brandon Stout wrote:
> hello, I am trying to use conserver to connect to serial ports over ssh and
> it is hanging. When I go direct it works fine (i am using Opengear IMX4248):
>
> [bstout@lab etc]$ ssh root@172.24.19.40 -p 3002
...
> default full { rw *; }
> default opengear  { type host; portbase 3000; portinc 1; }
> default * {
> logfile /var/log/conserver;
> timestamp 1hab;
> include full;
> master localhost;
> }
> default console01 { include opengear; host console01; }
> console dr01.arista { include console01; port 1; }
> console dr02.arista { include console01; port 2; }
...
> Has anyone gotten this to work using ssh?

I think you need to use the exec host type and setup the right execsubst
to get ssh to use the right port number.  The "host" type is just a raw
TCP socket connection.

Nate
_______________________________________________
users mailing list
users@conserver.com
https://www.conserver.com/mailman/listinfo/users



--

brandon



--

brandon



--

brandon