From Doug.Rice@onsemi.com Mon Aug 13 19:07:35 2012 Received: from exprod8og104.obsmtp.com (exprod8og104.obsmtp.com [64.18.3.88]) by underdog.stansell.org (8.14.5/8.14.5) with SMTP id q7DJ7S5Q014063 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Mon, 13 Aug 2012 19:07:33 GMT Received: from em1.onsemi.com ([65.197.242.105]) (using TLSv1) by exprod8ob104.postini.com ([64.18.7.12]) with SMTP ID DSNKUClQb+7QaDx7Nvb3Av+8AwUvMk8PsgPI@postini.com; Mon, 13 Aug 2012 12:07:33 PDT Received: from dns2.onsemi.com (dns2 [10.253.88.2]) by em1.onsemi.com (8.13.8/8.13.8) with ESMTP id q7DJ7QDe005737 for ; Mon, 13 Aug 2012 12:07:26 -0700 Received: from NAMAIL2.ad.onsemi.com (onwater2b.onsemi.com [10.100.16.166]) by dns2.onsemi.com (8.13.8+Sun/8.11.6) with ESMTP id q7DJ7QPr025122 for ; Mon, 13 Aug 2012 12:07:26 -0700 (MST) x-mimeole: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----_=_NextPart_001_01CD7986.E0227A0B" Subject: Avocent telnet issue Date: Mon, 13 Aug 2012 12:07:22 -0700 Message-ID: <5839778EAFBAF94787F3EB5B3A93FC39039C15BE@NAMAIL2.ad.onsemi.com> X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: Avocent telnet issue Thread-Index: Ac15ht5i1XTojERbT+OyySE4FJDIhA== From: "Doug Rice" To: X-Spam-Score: -1.499 () BAYES_00,HTML_MESSAGE X-Scanned-By: MIMEDefang 2.72 on 198.151.248.21 X-BeenThere: users@conserver.com X-Mailman-Version: 2.1.12 Precedence: list List-Id: Conserver Users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 13 Aug 2012 19:07:35 -0000 This is a multi-part message in MIME format. ------_=_NextPart_001_01CD7986.E0227A0B Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi folks, =20 I am converting from Cisco 2511 terminal servers to Avocent ACS6048 terminal servers. I have been using the Cisco terminal servers for years without issues on a variety of Sun and HP servers, disk arrays, and various other hardware. However, I can't seem to get the Avocent terminal servers to work properly. I am unable to get any response from a connected device via conserver. However, I can access the device just fine using telnet directly to the Avocent port. I do get a response if the Avocent port is put in raw mode but sending a L0 break doesn't get to the device. Sending break from telnet works just fine. Clearly I am missing something. I did set portbase to 7000 for the Avocent as recommended in an archived post but that did not fix this issue. =20 See below my conserver and console .cf files, sample working Cisco port config and a sample non-working Avocent port config. Any assistance is very much appreciated. =20 ############ conserver.cf ############ =20 # ------ make sure breaks are the way we want -------- break 1 { string "\z"; } break 2 { string "\r\d~\d^b"; delay 600; } break 3 { string "#."; } =20 =20 # ----- define some console types ------ default sun-std { break 1; } default sun-alt { break 2; } default sun-lom { break 3; } =20 =20 # ----- define some generic console defaults ------ default * { logfile /apps/conserver/logs/&; # '&' is replaced with console name timestamp 1hab; # write timestamps rw *; # allow all users master localhost; # default conserver host for console include sun-std; # default break for ^Ecl0 logfilemax 1m; # rotate log files at this limit } =20 =20 # ------- define terminal server attributes ---------- default cisco { type host; portbase 2000; portinc 1; } default avocent2 { type host; portbase 7000; portinc 1; } =20 # ------- define terminal server defaults ---------- default ciscots1 { include cisco; host ciscots1; } default avots1 { include avocent2; host avots1; } =20 # ------- define the consoles ---------- ###console myserver { include ciscots1; port 1; } console myserver { include avots1; port 12; } =20 =20 # ------- set up the an access list to avoid the default ------- access * { allowed 127.0.0.1; } =20 # ------- do some server configuration --------- config * { defaultaccess rejected; daemonmode on; logfile /var/log/conserver; autocomplete off; # must enter full console names } =20 ############ console.cf ############ =20 # ------ set default values for console client ------ =20 config * { master localhost; } =20 ############ Cisco port settings from old working port ############ =20 ciscots1#show line 1 Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns 1 TTY 9600/9600 - - - - - 46 75847 0/0 =20 Line 1, Location: "2353C", Type: "" Length: 24 lines, Width: 80 columns Baud rate (TX/RX) is 9600/9600, no parity, 1 stopbits, 8 databits Status: Ready Capabilities: EXEC Suppressed Modem state: Ready Special Chars: Escape Hold Stop Start Disconnect Activation ^^x none - - none Timeouts: Idle EXEC Idle Session Modem Answer Session Dispatch 0:10:00 never none not set Session limit is not set. Time since activation: never Editing is enabled. History is enabled, history size is 10. Full user help is disabled Allowed transports are pad telnet rlogin. Preferred is telnet. No output characters are padded No special data dispatching characters Modem hardware state: noCTS* noDSR* DTR RTS =20 ############ Avocent port settings - port 12 ############ =20 Physical Settings =20 Port: 12=20 Enable Cisco RJ45 Pin-Out: checked Status: Enabled Speed: 9600 Parity: None=20 Data Bits: 8=20 Stop Bits: 1=20 Flow Control: None CAS Settings =20 Port: 12=20 Port Name: myserver Enable auto discovery: unchecked Protocol: Telnet Authentication Type: None Text Session Hot Key: ^Z Power Session Hot Key: ^P TCP Port Alias: 7012 Port IPv4 Alias: =20 Port IPv4 Alias Interface: eth0 Port IPv6 Alias: =20 Port IPv6 Alias Interface: eth0 Allow session only if DCD is On: unchecked Enable auto answer: unchecked DTR Mode: Always On DTR Off Interval: 100 Line Feed Suppression: Disabled=20 NULL After CR Suppression: Disabled=20 Transmission Interval: 20 Break Sequence: ~break Break Interval: 500 Log In/Out Multi Session Notification: Disabled=20 Informational Message Notification: Disabled=20 =20 Data Buffering Settings =20 Port: 12=20 Status: Disabled=20 Type: Local Time Stamp: Disabled=20 Login/Logout Message: Disabled=20 Serial Session Logging: Disabled=20 =20 =20 ------_=_NextPart_001_01CD7986.E0227A0B Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Hi = folks,

 

I am converting from Cisco 2511 terminal servers to = Avocent ACS6048 terminal servers.  I have been using the Cisco = terminal servers for years without issues on a variety of Sun and HP = servers, disk arrays, and various other hardware.  However, I can't = seem to get the Avocent terminal servers to work properly.  I am = unable to get any response from a connected device via conserver.  = However, I can access the device just fine using telnet directly to the = Avocent port.  I do get a response if the Avocent port is put in = raw mode but sending a L0 break doesn't get to the device.  Sending = break from telnet works just fine.  Clearly I am missing = something.  I did set portbase to 7000 for the Avocent as = recommended in an archived post but that did not fix this = issue.

 

See below my conserver and console .cf files, sample = working Cisco port config and a sample non-working Avocent port = config.  Any assistance is very much appreciated.

 

############

conserver.cf

############

 

# ------ = make sure breaks are the way we want --------

break 1 { string "\z"; }

break 2 { string "\r\d~\d^b"; delay 600; = }

break 3 { string "#."; = }

 

 

# ----- = define some console types ------

default sun-std { break 1; }

default sun-alt { break 2; }

default sun-lom { break 3; }

 

 

# ----- = define some generic console defaults ------

default * {

        logfile = /apps/conserver/logs/&; # '&' is replaced with console = name

        timestamp = 1hab;           &n= bsp;     # write timestamps

        rw = *;            = ;            =    # allow all users

        master = localhost;          &nb= sp;    # default conserver host for = console

        include = sun-std;           = ;     # default break for ^Ecl0

        logfilemax = 1m;           &nbs= p;      # rotate log files at this = limit

}

 

 

# ------- = define terminal server attributes ----------

default cisco { type host; portbase 2000; portinc 1; = }

default avocent2 { type host; = portbase 7000; portinc 1; }

 

# ------- = define terminal server defaults ----------

default ciscots1 { include cisco; host ciscots1; = }

default avots1 { include avocent2; = host avots1; }

 

# ------- = define the consoles ----------

###console myserver { include ciscots1; port 1; = }

console myserver { include avots1; = port 12; }

 

 

# ------- = set up the an access list to avoid the default -------

access * {

        allowed = 127.0.0.1;

}

 

# ------- do = some server configuration ---------

config * {

        = defaultaccess rejected;

        daemonmode = on;

        logfile = /var/log/conserver;

        = autocomplete = off;           &nb= sp;   # must enter full console names

}

 

############

console.cf

############

 

# ------ set = default values for console client ------

 

config * = {

    master = localhost;

}

 

############

Cisco = port settings from old working port

############

 

ciscots1#show line 1

Tty Typ     = Tx/Rx     A Modem  Roty AccO AccI  = Uses    Noise   Overruns

   1 TTY   9600/9600   = -    -      -    = -    -    46    = 75847        0/0

 

Line 1, = Location: "2353C", Type: ""

Length: 24 lines, Width: 80 columns

Baud rate (TX/RX) is 9600/9600, no parity, 1 stopbits, = 8 databits

Status: = Ready

Capabilities: EXEC = Suppressed

Modem state: = Ready

Special Chars: Escape  = Hold  Stop  Start  Disconnect  = Activation

         &= nbsp;      ^^x    = none   -     = -       none

Timeouts:      Idle = EXEC    Idle Session   Modem Answer  = Session   Dispatch

         &= nbsp;     = 0:10:00        = never           &n= bsp;            = none     not set

Session limit is not set.

Time since activation: never

Editing is enabled.

History is enabled, history size is = 10.

Full user help is = disabled

Allowed transports are pad = telnet rlogin.  Preferred is telnet.

No output characters are padded

No special data dispatching = characters

Modem hardware state: = noCTS* noDSR*  DTR RTS

 

############

Avocent port settings - port 12

############

 

Physical = Settings 

Port: 12 =

Enable Cisco RJ45 Pin-Out: = checked

Status: = Enabled

Speed: 9600

Parity: None

Data = Bits: 8

Stop Bits: 1 =

Flow Control: None

CAS = Settings 

Port: 12 =

Port Name: myserver

Enable auto discovery: unchecked

Protocol: Telnet

Authentication Type: None

Text Session Hot Key: ^Z

Power Session Hot Key: ^P

TCP Port Alias:  7012

Port IPv4 Alias:  

Port IPv4 Alias Interface: eth0

Port IPv6 Alias:  

Port IPv6 Alias Interface: eth0

Allow session only if DCD is On: = unchecked

Enable auto answer: = unchecked

DTR Mode: Always = On

DTR Off Interval: = 100

Line Feed Suppression: Disabled =

NULL After CR Suppression: Disabled =

Transmission Interval: = 20

Break Sequence: = ~break

Break Interval:  = 500

Log In/Out Multi Session = Notification: Disabled

Informational = Message Notification: Disabled

 

Data = Buffering Settings 

Port: 12 =

Status: Disabled

Type: Local

Time = Stamp: Disabled

Login/Logout = Message: Disabled

Serial Session = Logging: Disabled

 

 

------_=_NextPart_001_01CD7986.E0227A0B-- From esx20110328@163.com Thu Aug 30 02:24:44 2012 Received: from m13-151.163.com (m13-151.163.com [220.181.13.151]) by underdog.stansell.org (8.14.5/8.14.5) with ESMTP id q7U2Oa0t017983 for ; Thu, 30 Aug 2012 02:24:43 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=163.com; s=s110527; h=Received:Date:From:To:Subject:Content-Type: MIME-Version:Message-ID; bh=J8ARNz018+Qv1wMJDsVRx9sDJ+2hmRbpWphl L7NB8lQ=; b=onIeIguUs5lveGotK+G8TAwYHBRGDHJQUda/y+7E8IIRtkwiP/rT cA6Esl71P/Qt7iFugdfGu9LxQFyOWyJIHKH5WhiJVSWwMD6mJH6iIP1/eU2wKkaU 1KdSqsDo3/j1EBFODj1e0o1ZAlW9y28SdNEUrZu/CJy2e18Owt9E8IQ= Received: from esx20110328$163.com ( [10.66.13.115, 66.187.239.10] ) by ajax-webmail-wmsvr151 (Coremail) ; Thu, 30 Aug 2012 10:24:31 +0800 (CST) X-Originating-IP: [10.66.13.115, 66.187.239.10] Date: Thu, 30 Aug 2012 10:24:31 +0800 (CST) From: esx20110328 To: users@conserver.com Subject: How to connect to Cyclades ACS6000 X-Priority: 3 X-Mailer: Coremail Webmail Server Version SP_ntes V3.5 build 20120727(19208.4800.4773) Copyright (c) 2002-2012 www.mailtech.cn 163com X-CM-CTRLDATA: lZR3aGZvb3Rlcl9odG09MjU5MDo4MQ== Content-Type: multipart/alternative; boundary="----=_Part_578108_343198629.1346293471486" MIME-Version: 1.0 Message-ID: <46b5ee79.2583b.139755818fe.Coremail.esx20110328@163.com> X-CM-TRANSID: l8GowEApx0Lgzj5QlF8TAA--.1201W X-CM-SenderInfo: hhv0jiirrqjjqy6rljoofrz/xtbBaQ0bTU9o8Gg9kwACsh X-Coremail-Antispam: 1U5529EdanIXcx71UUUUU7vcSsGvfC2KfnxnUU== X-Spam-Score: -2.506 () BAYES_00, HTML_MESSAGE, RP_MATCHES_RCVD, T_DKIM_INVALID, UNPARSEABLE_RELAY X-Scanned-By: MIMEDefang 2.72 on 198.151.248.21 X-BeenThere: users@conserver.com X-Mailman-Version: 2.1.12 Precedence: list List-Id: Conserver Users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Thu, 30 Aug 2012 02:24:44 -0000 ------=_Part_578108_343198629.1346293471486 Content-Type: text/plain; charset=GBK Content-Transfer-Encoding: 7bit Hi guys We meet some problem when use conserver to connect Cyclades ACS6000, We don't get any response when connecting to these new ACS6000 via conserver. telneting or sshing direct to the cyclades-host port-num works well. so Anybody could successful setup this or can give me a clue? BTW: before we setup conserver with Cyclades ACS6000, we already reference follow docs https://www.conserver.com/pipermail/users/2011-October/msg00012.html CFG: we have another one Cyclades ACS5000, in the same configuration file, it's work. I mean in the same configuration file, Cyclades ACS5000 works well, but Cyclades ACS6000 not works. #### set up global access default full { rw *; } # ------ defaults ------ default global { include full; logfile /var/consoles/pub/&; logfilemax 100m; timestamp 5mab; execrunas nobody:nobody; initrunas nobody:nobody; default cyclades-acs { type host; portbase 7000; portinc 1; } default acs5k-01.lab { include cyclades-acs; host acs5k-01.mgmt.lab.test.com; } default acs6k-01.lab { include cyclades-acs; host acs6k-01.mgmt.lab.test.com; } console hp-xw4600-01 { include acs6k-01.lab; host glabacs01.qe.lab.test.com; port 1; } console intel-q8200novt-8-3 { include acs5k-01.lab; host qeacs05.qe.lab.test.com; port 15; } ENV: conserver-8.1.17-1.el6.rf.x86_64 running with Red Hat Enterprise Linux Server release 6.3 ACS6048 with auxiliary port and single power supply bootcode: 2.0.1.0 (Feb 11 2010 - 21:47:07) firmware: 2.2.0.6 (Feb 11 2010 - 23:55:53) Best regards & Thanks Chenguang Liu ------=_Part_578108_343198629.1346293471486 Content-Type: text/html; charset=GBK Content-Transfer-Encoding: 7bit
Hi guys

   We meet some problem when use conserver to connect Cyclades ACS6000,
   We don't get any response when connecting to these new ACS6000 via conserver.
   telneting or sshing direct to the cyclades-host port-num works well.
   so Anybody could successful setup this or can give me a clue?

BTW: before we setup conserver with Cyclades ACS6000, we already reference follow docs
          https://www.conserver.com/pipermail/users/2011-October/msg00012.html

CFG: we have another one Cyclades ACS5000, in the same configuration file, it's work.
          I mean in the same configuration file, Cyclades ACS5000 works well, but Cyclades ACS6000 not works.

#### set up global access
default full    { rw *; }

# ------ defaults ------
default global {
        include full;
        logfile /var/consoles/pub/&;
        logfilemax 100m;
        timestamp 5mab;
        execrunas nobody:nobody;
        initrunas nobody:nobody;

default cyclades-acs { type host; portbase 7000; portinc 1; }

default acs5k-01.lab { include cyclades-acs; host acs5k-01.mgmt.lab.test.com; }
default acs6k-01.lab { include cyclades-acs; host acs6k-01.mgmt.lab.test.com; }

console hp-xw4600-01                { include acs6k-01.lab; host glabacs01.qe.lab.test.com; port 1; }
console intel-q8200novt-8-3        { include acs5k-01.lab; host qeacs05.qe.lab.test.com; port 15; }


ENV:
conserver-8.1.17-1.el6.rf.x86_64 running with Red Hat Enterprise Linux Server release 6.3
ACS6048 with auxiliary port and single power supply
bootcode: 2.0.1.0 (Feb 11 2010 - 21:47:07)
firmware: 2.2.0.6 (Feb 11 2010 - 23:55:53)

Best regards & Thanks
Chenguang Liu


------=_Part_578108_343198629.1346293471486--