[Date Prev] [Date Index] [Date Next] [Thread Prev] [Thread Index] [Thread Next]

RE: Conserver managing Cyclades TS - Connection Reset by Peer

Harris, David \(SBS US\) david.k.harris@siemens.com
Thu, 13 Jul 2006 13:54:19 -0700 (PDT)

  Yes.  All.protocol   should be set to   socket_server


-----Original Message-----
From: users-bounces On Behalf Of Nathan Straz
Sent: Thursday, July 13, 2006 12:40 PM
To: users@conserver.com
Subject: Re: Conserver managing Cyclades TS - Connection Reset by Peer

On Jul 13 12:25, Harris, David (SBS US) wrote:
>   Just to confirm...
>   From the conserver host, you can telnet to the cyclades by IP 
> address at port 7000+n, yes? (Just ensuring that routes are correct, 
> and the Cyclades is set for reverse-tcp...)

Yes, it can connect initially.  But after a random amount of time the
console hangs and it seems like the cyclades resets the connection.

reverse-tcp... I'll have to look at that.  While digging through the
cyclades manual to find that I ran over all.protocol.  Should that be
set to socket_server or raw_data?

>   You are using curly-braces in the conserver.cf file, and there are 
> no parenthesis masquerading as a bracket?
>   You have semicolons in all of the config lines of the conserver.cf 
> file, as seen in the example lines?

conserver is running without problems otherwise.

users mailing list