Re: connection to terminal server cli

I've experienced similar issues.  I think it may be because conserver
does not support the telnet protocol.  It really was not meant to
operate that way.  Maybe you should use the command instead then
conserver will spawn telnet when you try to connect to cs0

On Wed, 2004-01-07 at 17:04, Carl Zwanzig wrote:
> Hi,
> 
> I've just set up 8.0.9 on a RH9 system, and for the most part, all is
> going well. The current bogon is that connections to the internal CLI
> on some of the terminal servers doesn't echo characters. We have both
> cisco 2511s (11.0 and 12.0) and some portmaster 2e's (3.7.2 and .2c4).
> 
> The definitions look like:
> console cs0   { type host;     host cs0.lab.blablalba;
>                 port 23; options ondemand; }
> 
> In general, the cisco's work and the PMs don't. If I telnet to the
> PMs, I get character echo. If I console to them, I don't.
> 
> Any thoughts?
> 
> z!
> Carl Zwanzig
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users