Re: Conserver 7.1.3 & Netapp Filers

Hi Glenn!

yup, using cyclades TS2000 to get to my netapp consoles. i just made up some DB-9 to
RJ45 cables per the doc's here:

http://www.cyclades.com/solutions/techtalk/techtalk15.php

and they worked fine for me. maybe cisco would have some help on cabling for
you....

-- michael

ps: i'm connecting to F520s and F760's. 

On Wed, 15 May 2002, Glenn Grimes wrote:

> Hi all,
> 
> Is anyone out there using conserver to connect to a netapp filer.  I
> have tried all variations of cabling, straight/rolled/crossover, with
> different DB9 connectors, (the conserver server & the filer are a few
> meters apart, set up is Conserver_PC -> Cisco 2620 -> Patch Panel ->
> Patch Panel -> Filer).  
> 
> Netapp filers in general use a normal DB9 male connector and a rolled
> cable.  I have tried making new DB9 connectors with Pins 2 & 3 swapped
> etc but also with no luck.  I have tried connecting my patching into a
> PC and it is working fine with conserver, I am receiving a signal light
> on the 2620, but when I connect to the filer I do not receive a signal
> back at the Cisco 2620.
> 
> Any help would be greatly appreciated.
> 
> Rgds,
> 
> Glenn
> -- 
> System & Network Operations
> eircom net
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users
>