[Date Prev] [Date Index] [Date Next] [Thread Prev] [Thread Index] [Thread Next]

Re: Hello

Yashar Bashiri Moghadam ybashiri@gmail.com
Thu, 12 Aug 2010 18:08:04 GMT


Thanks for the reply Zonker, I think I did it as root. ser-steacie-g39u24.cons in the Avocent appliance name on the network that I added to the conf file. Even when I use sudo I still get the same error.

Cheers,

Yashar

On Thu, Aug 12, 2010 at 12:34 PM, Zonker Harris <consoleteam@gmail.com> wrote:
The location /var/consoles is where Conserver will put the log files for each named port in conserver.cf, so I'm guessing you have a console description in conserver.cf called ser-steacie-g39u24, correct?

Does conserver have the permissions to write to that directory (which should have been created during the install). Did you run your install as root, or as a non-root user?

         <  Z  >

On Aug 12, 2010, at 8:25 AM, Yashar Bashiri Moghadam <ybashiri@gmail.com> wrote:

Hi everyone,

I have some difficulties working with Conserver, I have my server setup and is connected to an Avocent box. I'm trying to connect to the ports and try different commands but keep getting errors like these... "FileOpen(/var/consoles/ser-steacie-g39u24.cons): No such file or directory: forcing down". I don't even have this file...maybe I made a mistake installing or configuring it??? Any idea would be appreciated.

Cheers

Yashar


On Wed, Jul 14, 2010 at 11:35 AM, Yashar Bashiri Moghadam <ybashiri@gmail.com> wrote:
Thanks very much, it is very helpfull.

Cheers

Yash


On Tue, Jul 13, 2010 at 9:06 PM, Zonker <consoleteam@gmail.com> wrote:
  Yashar, perhaps you can try reading through a slightly-old Conserver class I put on a LISA. It covers much of what is in the Conserver FAQ, but includes other info you may find useful.

  The basic presentation - http://www.conserver.com/consoles/Training/LISA2002-T9.PDF

  Other info is on my  Published Info page - http://www.conserver.com/consoles/Training/published.html

      Regards,

            -Z-     (The *other* Z... ;-)


On Tue, Jul 13, 2010 at 8:37 AM, Yashar Bashiri Moghadam <ybashiri@gmail.com> wrote:
autologin     config.h.in    configure.in    contrib     Makefile     TODO
CHANGES       config.log     conserver       FAQ         Makefile.in
compat.h      config.status  conserver.cf    INSTALL     PROTOCOL
config.guess  config.sub     conserver.html  install-sh  README
config.h      configure      console         LICENSE     test

That's how my conserever folder looks like... I have copied conserver.cf to /usr/local/etc/conserver.cf.
when I say conserver -d I get this error message >>> ERROR: getservbyname(conserver) failed

Thanks a lot

On Tue, Jul 13, 2010 at 11:13 AM, Carl Zwanzig <cpz@tuunq.com> wrote:
On 7/13/2010 7:29 AM, Yashar Bashiri Moghadam wrote:
I did installed and compiled it..I just can't run it...

What have you tried (exactly)?

Have you downloaded the source code and read the README & similar files?

z!


_______________________________________________
users mailing list
users@conserver.com
https://www.conserver.com/mailman/listinfo/users




--
ConsoleTeam - Support and training services for Conserver users.
www.conserver.com/consoles/
consoleteam.blogspot.com