Re: [Fwd: Whats this error]

When all else fails, use strace to trace the system calls.  You'll know
where this is failing and how to fix it.


On Tue, 2002-06-25 at 16:33, George Milder wrote:
> Well, I have turned off whatever filters I thought I had enabled. Turned
> back on most of the inet daemons I had turned
> off, rebuilt conserver-7.2.2 and receive the same error message -
> Connection refused.
> 
> nsswitch has files as the lookup method for hosts, and the etc/hosts has
> the address, fqdn and console on the line.
> 
> /etc/services has 
> 
> console         782/tcp         conserver       # console server
> 
> in it.
> 
> So, I am not sure what else needs to be changed. I know I must be
> shooting myself in the foot somewhere, 'cause this can't
> be that difficult to run.
> 
> The only other thing I can think of is that this system has dual nets. 1
> on the public side and a private side that has the actual console
> servers. 
> 
> Any other suggestions would be appreciated.
> ----
> 

> From: Bryan Stansell <bryan@conserver.com>
> To: users@conserver.com
> Subject: Re: Whats this error
> Date: 21 Jun 2002 14:49:30 -0700
> 
> On Fri, Jun 21, 2002 at 02:11:21PM -0700, George Milder wrote:
> > I just built the conserver 7.2.2 and when I run console I get
> > 
> > 	console: connect: 782@console: Connection refused
> > 
> > Can someone tell me where I went wrong.
> 
> the client is trying to connect to port 782 of the host named
> 'console'.  the server isn't up and listening on that port on that
> host.  so, either 'console' isn't the host you expect, or the server
> didn't start properly (check the logs), or you have other issues (like
> filters).  anyway, there's a few things to check and look out
> for...hopefully that'll get you going.
> 
> Bryan
> _______________________________________________
> users mailing list
> users@conserver.com
> https://www.conserver.com/mailman/listinfo/users
>